Sunday, January 20, 2013

Discount Starter and Alternator Power Tilt Trim Motor Yamaha Marine Outboard 40HP 50HP 60HP 70HP 80HP 90HP 6H1-43880-02

Power Tilt Trim Motor Yamaha Marine Outboard 40HP 50HP 60HP 70HP 80HP 90HP 6H1-43880-02 Review

Power Tilt Trim Motor Yamaha Marine Outboard 40HP 50HP 60HP 70HP 80HP 90HP 6H1-43880-02 Feature

  • New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed)
  • Includes: 2-Wire Connection, 3-Bolt Mount, O-Ring
  • Please verify this is the right part number before ordering

Power Tilt Trim Motor Yamaha Marine Outboard 40HP 50HP 60HP 70HP 80HP 90HP 6H1-43880-02 Overview

Models:

50-90HP 1992-95
40HP 1994
70-90HP 1996
60/70/90HP 1997 - Up

Note:
2-Wire Connection, 3-Bolt Mount, O-Ring Included

Replaces:

API MARINE
PT602NM
ARCO MARINE
6260
Yamaha
6H1-43880-02

Deluxe MAR-MTRCV-FS-15 Deluxe Yamaha Outboard F150 Motor Cover

Deluxe Yamaha Outboard F150 Motor Cover Review

Deluxe Yamaha Outboard F150 Motor Cover Overview

Deluxe Yamaha Outboard F150 Motor Cover Super heavy-duty protection for your Yamaha outboard's cowling. Constructed of ultra-durable Sur LastTM solution-dyed polyester fabric for the ultimate protection against fading and the elements. It is also non-abrasive, water repellent and resistant to UV, mildew and rot. Cover has a soft fabric inner liner for added paint protection and screened-in factory logos for unmatched style. Fits F150 motor.

Garelick 1027776 Garelick Eez-In Aluminum 2-Stroke Auxiliary Motor Bracket (8 H.P)

Garelick Eez-In Aluminum 2-Stroke Auxiliary Motor Bracket (8 H.P) Review

Garelick Eez-In Aluminum 2-Stroke Auxiliary Motor Bracket (8 H.P) Feature

  • GARELICK EEZ-In 71040

Garelick Eez-In Aluminum 2-Stroke Auxiliary Motor Bracket (8 H.P) Overview

ALUMINUM AUXILIARY OUTBOARD MOTOR BRACKETS are retractable. For trolling or for auxiliary use on power or sailboats. Bolts to transom holding motor safely out of water. Swings down to correct position for propulsion. 2" thick waterproof laminated mounting board with full ply at bolt holes for added strength. Simple easy 4 position locking device snaps locked in either elevated or lowered position. Stainless steel guide pin slides in safety groove for positive, smooth action. Sturdy mounting brackets 5-1/4" wide x 9" high. Husky secured stainless steel double torsion springs help offset motor weight. 18-8 stainless steel bolts and instructions included. 71040 works for motors with single attaching clamp. 71041 and 71057 are recommended for motors with standard shaft length. For motors up to 8 H.P. and maximum weight of 59#. Wooden mounting board is 8"W x 11-3/4"H x 1-3/4"T. Vertical travel 8-1/2".

Coleman F5BMS Coleman® 5HP Outboard Motor - Short Shaft

Coleman® 5HP Outboard Motor - Short Shaft Review

Coleman® 5HP Outboard Motor - Short Shaft Feature

  • 15" Shaft
  • Motor: 5 HP
  • Quiet, lightweight and compact
  • Ideal for small boats, inflatables or use as an auxiliary trolling motor

Coleman® 5HP Outboard Motor - Short Shaft Overview

Quiet, lightweight and compact, this Short Shaft Outboard Motor from Coleman is perfect for small boats, inflatables or use as an auxiliary trolling motor. This outboard spotlights a four-stroke, OHV liquid-cooled design.

Lester NEW TILT TRIM MOTOR YAMAHA 225-250 Outboard 61A4388001

NEW TILT TRIM MOTOR YAMAHA 225-250 Outboard 61A4388001 Review

NEW TILT TRIM MOTOR YAMAHA 225-250 Outboard 61A4388001 Feature

  • TILT & TRIM All Models 225-250 H.P
  • 4-WIRE CONNECTION (RING TERMINAL ENDS)
  • 3-BOLT MOUNTING

NEW TILT TRIM MOTOR YAMAHA 225-250 Outboard 61A4388001 Overview

Brand New Aftermarket Power Tilt Trim Motor for Yamaha 225-250 Horsepower Outboard Engines.

Garelick 71039:01 Garelick Stainless Steel Outboard Motor Bracket

Garelick Stainless Steel Outboard Motor Bracket Review

Garelick Stainless Steel Outboard Motor Bracket Feature

  • Maximum Load 82 lbs.
  • Vertical Travel 14-1/4 inches

Garelick Stainless Steel Outboard Motor Bracket Overview

Have Waterproof Laminated Mounting Board With Full Ply At Bolt Holes For Added Strength. Large Stainless Steel Flate 1-1/8\ Head Elevator Bolts. Husky Secured Stainless Steel Torsion Springs Help Counterbalance Motor Weight. Simple Four Position Locking Bar Snaps Locked In Either Elevated Or Lowered Position. Stainless Steel Guide Pin Slides In Groove For Smooth Action. Unique Adjustable Brackets To Set Correct Trim Angle. Tough 18-8 Stainless Steel Mounting Bolts And Instructions Included. Positive Or Negative Trim Adjustment Allows Pre-Setting Of Trim Angle Of Motor For Optimum Motor Performance.
HP Rating: 7-1/2 - 12
Motor #S: 82
Board Travel\": 14-1/4
W X H X T\": 8-1/2 X 10-3/4 X 2
HP Rating: 7-1/2 - 12
Motor #S: 82
Board Travel\": 14-1/4
W X H X T\": 8-1/2 X 10-3/4 X 2
Part Number(s): GAR 71039 GAR-71039 GAR_71039 GAR71039 3-71039 "

Tungsten Marine Tilt Trim Motor for Yamaha Outboard 40-90 HP replaces 6H1-43880-02-00

Tilt Trim Motor for Yamaha Outboard 40-90 HP replaces 6H1-43880-02-00 Review

Tilt Trim Motor for Yamaha Outboard 40-90 HP replaces 6H1-43880-02-00 Feature

  • Brand new Motor!

Tilt Trim Motor for Yamaha Outboard 40-90 HP replaces 6H1-43880-02-00 Overview

Tilt Trim Motor for Yamaha Outboard 40-90 HPReplaces Yamaha part number 6H1-43880-02-00.This brand-new Tilt Trim motor is a 3-bolt mount with a 2 wire connection. Kit does contain o-ring.It is designed for the following outboard applications: 40 HP in 1994, 50 HP - 90 HP from 1992 to 1995, 70 HP - 90 HP in 1996, 60, 70 and 90 HP from 1997 and up.

Discount Starter and Alternator Power Tilt Trim Motor Mercury Marine Mariner Outboard Engines Design I 3 Ram 3 Wire Side Fill Integral Systems 99186 99186-1 99186T

Power Tilt Trim Motor Mercury Marine Mariner Outboard Engines Design I 3 Ram 3 Wire Side Fill Integral Systems 99186 99186-1 99186T Review

Power Tilt Trim Motor Mercury Marine Mariner Outboard Engines Design I 3 Ram 3 Wire Side Fill Integral Systems 99186 99186-1 99186T Feature

  • New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed)
  • Supplied complete with Wiring Harness & Cartridge Pump
  • Replaces Square Eaton & Round Prestolite Style Units
  • Please verify this is the right part number before ordering

Power Tilt Trim Motor Mercury Marine Mariner Outboard Engines Design I 3 Ram 3 Wire Side Fill Integral Systems 99186 99186-1 99186T Overview

Models: Mercury/Mariner 35-225 H.P. O/B 1985-1992
with Design 1, 3-RAM, Side Fill Integral Trim/Tilt System
Relaces Round Prestolite Motor & Square Eaton Motor
2-Wire Connection
Replaces Older 3-Wire Connection
Supplied complete with Wiring Harness

Replaces:
API MARINE
PT475N, PT475TN, PT475TN-2
ARCO MARINE
6278
MERCURY MARINE
99186, 99186-1, 99186T


OEM(s): Mercury Marine
Voltage: 12
Rotation: Reversible
Field Hsg OD: 78mm / 3.071in
Overall Length: 172mm / 6.772in
Terminal 1 Size: Spade
Terminal 2 Size: Spade
Terminal 3 Size: Spade
Approximate Weight: 7.4 lbs / 3.36 kg
Notes:
Mercury Marine & Mariner 35-220 HP Applications with Design I,
3 Ram,
3 Wire Systems,
Replacement Tilt/Trim Motor & Cartridge Pump,
Replaces Square Eaton & Round Prestolite Style Units

Garelick 71075:01 Garelick Outboard Motor Bracket

Garelick Outboard Motor Bracket Review

Garelick Outboard Motor Bracket Feature

  • GARELICK EEZ-In 71075

Garelick Outboard Motor Bracket Overview

STATIONARY OUTBOARD MOTOR BRACKET is adjustable. Permanent fixed height mount with built-in transom angle and trim adjustment for auxiliary or trolling motor. Same adjustment brackets can be inverted for positive or negative use and adjust to transoms with plus or minus angles from 7-35 degree in 7 degree increments. Tough 304 stainless steel brackets. 1-1/2" thick, 8" wide waterproof laminated mounting board with full ply at bolt holes for added strength. For motors up to 15 HP.

Attwood Marine Products 105682 Attwood Marine Products 105682 Custom Fit Mercury Motor Cover

Attwood Marine Products 105682 Custom Fit Mercury Motor Cover Review

Attwood Marine Products 105682 Custom Fit Mercury Motor Cover Feature

  • The outer shell is tough, abrasion-resistant polyester
  • Soft non woven polyester backing that provides a cushioned barrier around the engine cowling
  • Acrylic coating keeps the cover waterproof and UV-resistant
  • Includes quick-release buckle for fast tightening and removal
  • Backed by a 5 year limited manufacturer warranty

Attwood Marine Products 105682 Custom Fit Mercury Motor Cover Overview

Attwood Marine Products Custom Fit Mercury Motor Cover is constructed of 2-ply laminated polyester. The outer shell is tough, abrasion-resistant polyester and the acrylic coating keeps the cover waterproof and UV-resistant. The inside lining is a soft, non woven polyester backing that provides a cushioned barrier around the engine cowling. It also comes with a 1 inch polyweb strap in the bottom hem which cinches the cover tight and quick-release buckle for fast tightening and removal. These covers are so durable they are backed by a 5 year limited manufacturer warranty.

Sierra International 18-5884 Sierra International 18-5884 Marine Optical Sensor for Johnson/Evinrude Outboard Motor

Sierra International 18-5884 Marine Optical Sensor for Johnson/Evinrude Outboard Motor Review

Sierra International 18-5884 Marine Optical Sensor for Johnson/Evinrude Outboard Motor Feature

  • Made by Sierra

Sierra International 18-5884 Marine Optical Sensor for Johnson/Evinrude Outboard Motor Overview

Optical Sensor. Optical Sensor

Garelick 71042:01 Garelick Aluminum Auxiliary Outboard Motor Bracket

Garelick Aluminum Auxiliary Outboard Motor Bracket Review

Garelick Aluminum Auxiliary Outboard Motor Bracket Feature

  • GARELICK EEZ-In 71042

Garelick Aluminum Auxiliary Outboard Motor Bracket Overview

ALUMINUM AUXILIARY OUTBOARD MOTOR BRACKETS are retractable. For trolling or for auxiliary use on power or sailboats. Bolts to transom holding motor safely out of water. Swings down to correct position for propulsion. 2" thick waterproof laminated mounting board with full ply at bolt holes for added strength. Simple easy 4 position locking device snaps locked in either elevated or lowered position. Stainless steel guide pin slides in safety groove for positive, smooth action. Sturdy mounting brackets 5-1/4" wide x 9" high. Husky secured stainless steel double torsion springs help offset motor weight. 18-8 stainless steel bolts and instructions included. 71040 works for motors with single attaching clamp. 71041 and 71057 are recommended for motors with standard shaft length. For motors from 7-1/2 to 12 H.P. and maximum weight of 82#. Wooden mounting board is 8-1/2"W x 10-3/4"H x 2"T. Vertical travel 14-1/4".

TaylorMade 71723 Taylor Made Products Trailerite Semi-Custom Boat Cover for V-Hull Bow Riders Boats with Inboard/Outboard Motor

Taylor Made Products Trailerite Semi-Custom Boat Cover for V-Hull Bow Riders Boats with Inboard/Outboard Motor Review

Taylor Made Products Trailerite Semi-Custom Boat Cover for V-Hull Bow Riders Boats with Inboard/Outboard Motor Feature

  • Bow Rails under 6"
  • Low profile accessories
  • Sewn in Reinforcement
  • 2 year warranty

Taylor Made Products Trailerite Semi-Custom Boat Cover for V-Hull Bow Riders Boats with Inboard/Outboard Motor Overview

Custom Boat Covers are manufactured for a specific year, make, and model of boat, providing the best in fit and trailerability. These covers are constructed with outstanding features. Four-ply folded double-stitched seams. 1-Inch heavy-duty UV-resistant tie-down loops sewn into the hem.

Lester POWER TILT TRIM MOTOR YAMAHA OUTBOARD 6H1-43880-02

POWER TILT TRIM MOTOR YAMAHA OUTBOARD 6H1-43880-02 Review

POWER TILT TRIM MOTOR YAMAHA OUTBOARD 6H1-43880-02 Feature

  • 12 Volt Reversible Motor with 2-Wire Configuration
  • 2-Wire Configuration, Ring Terminals, (3) 6mm Unthreaded Mounting Holes

POWER TILT TRIM MOTOR YAMAHA OUTBOARD 6H1-43880-02 Overview

Power trim motor for Yamaha sea drive. 12 Volt reversible motor with 2-wire configuration.

Voltage:12
Rotation:Reversible
Field Hsg OD:64mm / 2.520in
Overall Length:119mm / 4.685in
Shaft OD:8mm / 0.315in
Shaft Notes:4mm Drive Tang
New or Remanufactured:New
Approximate Weight:2.85 lbs / 1.30 kg
Notes:
2-Wire Configuration, Ring Terminals, (3) 6mm Unthreaded Mounting Holes
Application:
Yamaha Marine Applications

Fits the following:
50-90HP1992-95
40HP1994
70-90HP1996
60,70,90HP1997-ON

Replaces these part numbers:
API MARINEPT602NM
ARCO MARINE6260
YAMAHA6H1-43880-02

TaylorMade 926666 Taylor Made Products Outboard Boat Motor Hood Cover (Cotton) (33" x 25" x 28", Silver Gray)

Taylor Made Products Outboard Boat Motor Hood Cover (Cotton) (33" x 25" x 28", Silver Gray) Review

Taylor Made Products Outboard Boat Motor Hood Cover (Cotton) (33" x 25" x 28", Silver Gray) Feature

  • Re-designed to better fit the newer cowl sizes and later model engines
  • Mildew resistant
  • UV protected
  • Draw rope in the hem
  • Silver Gray color

Taylor Made Products Outboard Boat Motor Hood Cover (Cotton) (33" x 25" x 28", Silver Gray) Overview

Taylor Made Motor Hood Cover keeps your motor under cover... SAVINGS PRICED! That motor's expensive. So protect it with a little help from the boating experts at Taylor Made with this Motor Hood Cover. Details: Cut to fit close for trailering; Durable Poly / cotton boat cover fabric will take years of use and abuse; Draw rope in the hem let you cinch up securely; State Color. Order Today! Taylor Made Motor Hood Cover, 33x25x28", Gray

MarineTech Products 55-0010 Marinetech 55-0010 Stainless Steel Marine Outboard Motor Bracket

Marinetech 55-0010 Stainless Steel Marine Outboard Motor Bracket Review

Marinetech 55-0010 Stainless Steel Marine Outboard Motor Bracket Feature

  • Fits Motors up to 10 horse power at 80 pounds maximum

Marinetech 55-0010 Stainless Steel Marine Outboard Motor Bracket Overview

Stainless Steel Outboard Motor Bracket Up to 10 horse power. The Adjustable outboard motor bracket is stainless steel construction and non-corrosive for saltwater use. Designed for use with power or sail boats. Manual operation means no power required to raise and lower your auxiliary outboard motor. Features Stainless Steel Construction Fits Motors up to 10 horse power at 110 pounds.14" travel.

Coleman F2.6BMS Coleman 2.6HP Manual Start Outboard Motor (Black)

Coleman 2.6HP Manual Start Outboard Motor (Black) Review

Coleman 2.6HP Manual Start Outboard Motor (Black) Feature

  • Quiet efficient 4 stroke motor
  • Engineered for lightweight, quiet, reliable operation, the Coleman Four Stroke Outboard Motor is great for small boats, inflatable boats or used as an auxiliary trolling motor.
  • Gear Position: Forward/Neutral
  • Max Fuel Consumption: .53 (gal/hr)
  • Fuel Tank: 1.2L

Coleman 2.6HP Manual Start Outboard Motor (Black) Overview

Engineered for lightweight, quiet, reliable operation, the Coleman Four Stroke Outboard Motor is great for small boats, inflatable boats or used as an auxiliary trolling motor. It is compact and allows for easy shifting making this an ideal option when choosing your next motor. HP@rpm: 15 @5000 Length : 39.4-Inch Width: 16.8-Inch Height: 47.5-Inch Transom Height: 22.3-Inch Weight : 108-Pound Displacement : 323-Cubic Centimeter Control: Tiller Start: Manual Gear Position: Forward/Neutral/Reverse Trim and Tilt: Manual Tilt Max Fuel Consumption: 1.4 (gal/hr) Through the propeller hub exhaust CDI ignition system Innovative large recoil wheel FEATURES: Quiet efficient 4 stroke motor Thermostat controlled water cooling Oil level gauge indicator Heavy duty marine aluminum alloy Vibration reduction system Start in gear protection Twist grip throttle control Safety Lanyard Ultra low emissions